VELUX venetian blinds

Yes. VELUX PAL is a venetian blind with aluminium slats. It is designed for humid rooms because the slats are moisture resistant and easy to clean, so it works well in places like bathrooms and kitchens.

In practice, steam and typical bathroom conditions should not harm it during normal use, and it is usually easier to keep clean than fabric window coverings.

Tip: after a shower, ventilate the bathroom (or leave the roof window slightly open) to reduce moisture and limescale deposits on the slats.

Always start with the code from the window nameplate (type sign). You need the window type (GGL) and the size code (S06).

Next, in the product configurator, select the VELUX PAL venetian blind in exactly the same size code as on the nameplate (S06). The correct fit depends on the full system, including the side channels and the mounting method.

Do not measure the glass or the frame. For VELUX products, the size code from the nameplate is the key for correct compatibility and a perfect fit.

You can find the code on the window nameplate (type sign) on the window sash. It includes the window type and the size code needed for selection.

Best practice: take a clear photo of the nameplate and compare the code character by character during selection to avoid mistakes (for example: M04 vs MK04).

If you have more than one roof window, check the nameplate on each window. Sizes can differ even within the same home.

Yes. With VELUX PAL, you can precisely control light and privacy by adjusting the tilt angle of the aluminium slats.

This is very practical in a bathroom, because you can let daylight in while still reducing visibility from outside.

It also works well in an office or work room when you want to reduce glare but do not want full blackout.

Yes. This product is designed for DIY installation and it usually takes only a few minutes when the size code is selected correctly.

The installation uses the factory-prepared mounts in the VELUX window (Pick&Click). In most cases, there is no need for modifications or custom fitting.

Important: the installation video is included inside the product description on the shop page. It is worth watching it before you start.

Because PAL has aluminium slats and is designed for humid rooms, regular wiping is usually enough to remove deposits and dirt before they build up.

Clean gently with a soft cloth. Avoid aggressive chemicals and rough sponges, to prevent scratching the slats and side channels.

If you have hard water, more frequent light cleaning helps reduce visible limescale, and it reduces the need for strong cleaning later.